DINTEK Cat 7 S/FTP Solid Cable With Braiding 305m

DINTEK PowerMAX7™ Category7 cable is specifically designed to support current and future high speed network applications such as 10-Gigabit Ethernet. 
The cable is constructed of 4 screened pairs and a drain wire. DINTEK PowerMAX7™ Category7 S/FTP  cable eliminates alien crosstalk, gives excellent signal isolation and provides superior electromagnetic interference protection.

POWERMAX7™ : 600Mhz High Speed Transmission
Conductor : 23AWG Bare Solid Copper
Jacket : LSZH
Color : Gray

Applications

• 10GBASE-T Ethernet

• 100BASE-TX Fast Ethernet

• 1000BASE-T Gigabit Ethernet

• 1000BASE-TX Gigabit Ethernet

• 10BASE-TX Ethernet

• ATM CB1G

• 155/622 Mbps ATM

• 100 Mbps TP-PMD

• 100VG-AnyLAN

• 4/16 Mbps Token Ring

• Voice

Industry Standards

• Flame Retardancy is verified according to IEC 60332-1-2

• ISO/IEC11801 Class F, 2nd edition

• ANSI/TIA/EIA Cabling Standard 568-C.2

• 3P Certified for Category 7 S/FTP installation Cable

Electrical Characteristics

• Twisted pair color code:

•    Pair 1> blue, white/blue ring.

•    Pair 2> orange, white/orange ring

•    Pair 3> green, white/green ring

•    Pair 4> brown, white/brown ring

• Conductor:23AWG solid Bare copper 0.419mm±0.02mm

• Insulation material: Foam-Skin PE

• Diameter of dielectric core: 1.42±0.05mm

• Number of twist pairs: 4 pairs

• Individual Shielding: A layer of aluminum mylar tape

• Assembly: 4 pairs of dielectric core shall be stranded in circular form.

• Overall Shielding: Tinned copper wire Braiding, normal with min. 40% coverage.

• Material of jacket: LSZH

• Overall Diameter: Ave 7.4±0.3mm

• Color: Assorted upon request

Cable Data 

• Spark test: 2000 ± 250 V ac

• Impedance: 125 ohms±20%(64KHz) 100 ohms±15%(1~500MHz)

• D.C.R (Max.) : 7.91 ohm /100m at 20°C

• D.C.R. Unbalance (Max.) : 2% MAX.

• Mutual Capacitance: nom. 5600pf/100m

• Capacitance, unbalance (Max.): 160 pF/100m

• DC Insulation Resistance (Min.): 150M ohm/km

• Dielectric Strength: 2500 Vdc / 3 seconds